您现在的位置:主页 > lehu66乐虎国际官网 > 电动阀 >

E电动执行器

上一篇:没有了 下一篇:GD电动执行器
1.概述Summary “E”系列电动执行器用于控制0°~270°旋转的阀门及其他同类产品,如蝶阀、球阀、风门、挡板阀、旋塞阀、百叶阀等,可以广泛应用于石油、化工、水处理、船舶、造纸、电站、供热供暖、楼宇自控、轻工等各行业中。它以380V/220V/110V交流电源为驱动电源,以4-20mA电流信号或0-10V DC 电压信号为控制信号,可使阀门运动到所需位置,实现其自动化控制,最大输出扭矩达4000N·m。 The series of "E" electric actuator is used for controlling 0°270° rotation of the valves and other similar products, such as butterfly valve, ball valve, damper, flapper valves, cock valves, etc. It’s widely used in petroleum, chemical, water treatment, shipping, paper making, power plants, heating, light industry and other industries. It drives by 380V/220V/110V AC power. Control signal is 4-20mA current signal or 0-10V DC voltage signal, enables move the valve to the desired position, achieving its automation, maximum output torque is up to 4000N·m..   2性能特点Performance Features 2.1壳体Shell 壳体为硬质铝合金,经阳极氧化处理和聚酯粉末涂层,耐腐蚀性强,防护等级为IP67,NEMA4和6,并有IP68型供选择。 The shell is made of horniness aluminium alloy, pass through anodic oxidation treatment and polyester powder coating, so it has strong corrosion resistance. Protection grade is IP67,NEMA 4 AND 6, and optional IP68 type. 2.2电机Electric Machinery 全封闭式鼠笼式电机,体积小,扭矩大,惯性力小,绝缘等级为F级,内置过热保护开关,可防止过热损坏电机。 Fully enclosed Squirrel-cage electric Machinery, small volume, large torque, and small inertia force, F-class insulation rating, inside hot protection switch, avoid damaging the electric machinery. 2.3手动结构Manual Structure 手柄的设计保证安全可靠、省力、体积小。不通电时,扳动手柄可进行手动操作。不用手动时,将扳手置于扳手夹内,方便使用。 The design of handle ensure safe, reliable, labor-saving, small volume. When it don’t have electricity, it can be manually operated by handle. When you don't operate by manus, you can put the spanner in the spanner folder, then you can easy to use it. 2.4指示器Indicator 指示器安装在中心轴上,可以观察阀门位置。透镜采用凸出镜设计,不积水,观察更方便。 Indicator installs in the center axis, so it can observes the valve position. It adopts convex mirror design, no cumulate water, more convenient to observe. 2.5干燥器Space heater 用来控制温度,防止由于温度和天气变化导致执行器内部水分凝结,保持内部电气元件的干燥。 It is used for controlling temperature, avoiding internal moisture of electric actuator condensed because of the changing of temperature and weather,keep inner electric device dry. 2.6密封Sealing 密封性好,标准产品防护等级是IP67,并可选IP68防护等级。 Good sealing performance, and the protection class of standard product is IP67, and optional IP68 protection grade. 2.7限位开关Limit switch 机械,电子双重限位。机械限位螺钉可调,安全可靠;电子限位开关由凸轮机构来控制,简单的调整机构能精确并方便地设定位置,且不受手轮过量的影响。 Mechanical, electronic double limit. Mechanical limit screw is adjustable, safe and reliable; electron limit switch is controlled by the cam mechanism, easy adjustment institutions can set the position accurately and conveniently, and it doesn’t affect overly by handwheel. 2.8自锁Self-locking 精密的蜗轮蜗杆机构可高效传输大扭矩,效率高,噪音低(最大50分贝),寿命长;有自锁功能,防止反转,传动部分稳定可靠,无需再加油。 Exact worm and worm gear can efficiently transfer large torque, high efficiency, low noise (max. 50 dB), long life, and it has self-locking function to prevent the inversion, transmission part is stable and reliable, no need to add oil. 2.9防脱螺栓Anti-off bolt 拆除外壳时,螺栓附在壳体上,不会脱落。 When removed the shell, the bolt would be attached to the shell and didn’t fall off. 2.10安装Install 底部安装尺寸符合ISO5211/ DIN3337国际标准,孔成双四方形便于带方杆的阀线性或45°转角安装,适应性强。可以垂直安装,也可以水平安装。 The installation size of the bottom conforms to the international standard ISO5211 / DIN3337, The holes are double square so that it’s easy to fix the linear or 45°corner valves attached square bar, adaptable. It can be installed vertically, and also can be installed level. 2.11线路Circuitry 控制线路符合单相或三相电源标准,线路布置紧凑合理,接线端子可有效满足各种附加功能的要求。 Control circuit conforms to the single-phase or three-phase power supply standard, reasonably compact line layout, wiring terminals can effectively satisfy a variety of additional functional requirements.   3性能参数 Performance Parameter
型号
Model
最大输出扭矩 N·M 动作时间90°Operating (S) 输出轴(mm)
Output axis
电机
Motor
(W)
单相额定电流
Single-phase rated currentA50HZ
220V(A)50HZ
重量
Weigh
(kg)
Square Deep 圆Round Deep
E-005 50 30 11×11 15.5 Φ12.6 26 10 0.25 3.6
14×14 18
E-008 80 30 11×11 15.5 Φ15.7 26 10 0.25 3.6
14×14 18
E-010 100 30 14×14 18 Φ15.7 28 15 0.35 4.6
17×17 22.5 Φ18.95 28
E-015 150 30 14×14 18 Φ18.95 28 15 0.37 4.6
17×17 22.5
E-020 200 30 22×22 26 Φ22.13 45 45 0.3 13
E-030 300 30 22×22 26 Φ28.48 45 45 0.31 13.4
E-040 400 30 22×22 26 Φ28.48 45 60 0.33 13.8
E-060 600 30 27×27 32.5 Φ31.65 45 90 0.33 14
E-080 800 45 27×27 32.5 Φ31.65 45 180 0.47 14.3
E-100 1000 135 27×27 32.5 Φ31.65 45 180 0.47 14.5
E-160 1600 135 Max φ45 65 180 0.85 60
E-200 2000 135 Max φ45 65 180 0.85 60
E-300 3000 135 Max φ45 65 180 0.85 60
                     
  4标准技术参数 Standard Technical Parameter
外壳Shell 铝合金外壳,防水级别IP67,NEMA4 and 6
Aluminium alloy Shell, waterproof leve:IP67,NEMA4 and 6
 
电机电源Power supply 110/220V AC 1Phase,380/440V AC 3Phase, 50/60Hz, ±10%  
控制电源Control supply 110/220V AC 1Phase50/60 Hz, ±10%  
电机Motor 鼠笼式异步电机Squirrel-cage Asynchronous Motor  
限位开关Limit switch 2 X 开(Open)/关(Close),SPDT,250V AC 10A  
辅助限位开关
Additional Limit switch
2 X 开(Open)/关(Close),SPDT,250V AC 10A  
行程Travel angle 90°270°±10°(90°以上提前说明)
When it’s over 90°,please note us in advance
0°~270°
失速保护/操作温度
Stall protection/
Operating temperature
内置热保护,开120 ±5/97 ± 5
Built-in thermal protection, On 120 ±5/Off 97 ± 5
 
指示器Indicator 连续的位置指示Continuous situation indication  
手动操作Manul operation 机械手柄Mechanical handle
(可选装手轮Optional:fixing with the handwheel 
 
自锁装置
Self-locking device
蜗轮,蜗杆机构提供自锁
Provide self-locking by worm and worm gear
 
机械限位
Mechanical Limit
2个外部调整螺栓2 external adjustable screws  
干燥器Space heater 7-10W (110/220V AC)防冷凝Anti-condensation  
接线孔Conduit entries 2个(Pieces) M18  
环境温度
Ambient temperature
-20--+70℃  
润滑Lubrication 铝基润滑脂(EP型)Grease molyEP tyte  
材料Material 钢,铝合金,铝青铜,聚碳酸脂
Steel, Aluminium alloy, Aluminium bronze, Polycarbonate
 
环境湿度
Ambient humidity
最大(Max) 90% RH 非凝结Non-Condensing
抗震性能Anti-vibration X Y Z 10g,0.2~34 Hz,30分(minutes)  
外涂层External coating 干粉,环氧聚酯Dry powder, Epoxy polyester  
  5外观图Outside View 5.1 E-05~08外观及安装尺寸(虚线部分为模拟量控制盒,开关型无此尺寸) E-05~08 Appearance and installation dimensionThe part of broken line is used for analog quantity control box, Open/Close model don’t have this size. 图1   5.2 E-10~15外观及安装尺寸(虚线部分为模拟量控制盒,开关型无此尺寸) E-10~15 Appearance and installation dimensionThe part of broken line is used for analog quantity control box, Open/Close model don’t have this size. 图2 5.3 E-20~100外观及安装尺寸(虚线部分为模拟量控制盒,开关型无此尺寸) E-20~100 Appearance and installation dimensionThe part of broken line is used for analog quantity control box, Open/Close model don’t have this size. 3 5.4 E-160~300外观及安装尺寸(虚线部分为模拟量控制盒,开关型无此尺寸) E-160~300 Appearance and installation dimensionThe part of broken line is used for analog quantity control box, Open/Close model don’t have this size. 由于电动执行器内容很多,想了解更详细资料请来电咨询我司索要!